RemDevice AustraliaCall Us : +64 9 426 7636
PAIL
Radio transmitter with joysticks
Standard configuration
Models available for all kinds of crane
Different configurations are available for installation on new and used cranes, for tower cranes, low or high rotation and self-assembly cranes.
The receiver unit can be located either inside or outside the electric panel
BRICK 09
The BRICK 09 can transmit up to 9 commands at double speed.
In the standard configuration the 6 central pushbuttons control the three basic crane operations: lifting and lowering, left/right rotation, trolley in/out.
Some of our models in production.
"Made-to-measure configurations on request."
BRICK 10
The handheld keypad BRICK 10 can transmit 10 commands at double speed. In the standard configurations the 6 central pushbuttons control the three basic crane manoeuvres:
lifting and lowering, left/right rotation, trolley in/out.
In cranes working with an inverter the free pushbuttons can be used for higher speeds. It is possible to command 4 speeds for all three basic manoeuvres plus an auxiliary command for the brake.
The start up of the crane takes place by turning the start key two clicks (the first click is the on-switch, the second, with spring return, is for START).
Potentiometric control module
By connecting the potentiometer to the RxDIN receiver it is possible to control cranes that have proportional manoeuvre varying the input power.
Each module controls one movement.
It is possible to use more than one potentiometer to control the different manoeuvres of the same machine.
